Hardware
The following material are used for Installations, and further information about configuring many of these devices can be found in the guides in these docs.
See NYCMesh's Networking Hardware and Installation Equipment docs for further details and information on the materials below.
Access Points
Routers
- Ubiquiti EdgeRouter X
- Ubiquiti EdgePoint R6 - see NYC Mesh's doc on this alternative to ER-X's.
- MikroTik hEX PoE
PtP and PtMP radios
Mounts
Accessories
- Cat5e Ethernet 1000 ft
- Ethernet Cables 3'
- 6-outlet power strip
- Extension cords
- PoE Injector/Splitter
- Ethernet to Ethernet adapter
- USB Type C to Ethernet adapter
- Mounting Tape
Tools
Ethernet Cabling
- Ethernet cable crimper
- CAT5e cable stripper
- Ethernet cable tester
- Needlenose pliers
- Screwdrivers
- Phillips Precision Screwdriver (No. 1)
Hardware tools
- Drill
- Cordless hammer drill
- Mortar and Wood drill bits
- Hammer
- Scissors
Consumables
- Concrete nails
- Concrete screws (3/16" hex head CSH316134)
- Adjustable crescent wrench (6")
- Screws
- Nails
- Cable staples
- Cable fastener clips
- Small diameter (28) hose clamp
- Zipties
- Electric Tape
- Hex socket drill bits (3/8" for hose clamps and 1/4" for masonry screws)
- Cobalt / titanium drill bit (1/4")
- Carbide-tip masonry drill bit (5/32")
- Rubberized waterproof sealant
- Safety Glasses